Generalimex Trading Limited — Your System Solutions Partner

Ceiling Systems

Acoustic ceilings: mineral fibre, wood wool and fabric panels

What sound absorption means in practice, and how three common acoustic ceiling materials differ in performance, appearance and robustness.

In a room with hard surfaces, sound keeps bouncing between walls, floor and ceiling. Speech becomes tiring to follow and noise builds up. The ceiling is usually the largest free surface, so it is the first place to add absorption.

Two different jobs: absorption and insulation

Sound absorption reduces echo inside a room. It is described by an absorption coefficient between 0 and 1, where a higher value means more sound is absorbed. Sound insulation is something else: it limits sound passing from one room to another and depends on mass and airtightness. A light, porous ceiling can be an excellent absorber and still let sound pass over a partition through the void.

Mineral fibre tiles

Lightweight tiles laid in an exposed grid. They are economical, quick to install and easy to lift for access. Performance ranges from basic to very high depending on the tile density and surface. They are the standard choice for offices, schools and retail areas with a regular grid.

Wood wool panels

Panels made of wood fibres bound with cement or a mineral binder. The open, textured surface absorbs sound, especially when mineral wool is placed behind it, and the panels are robust enough for sports halls, schools, car parks and other areas where impact is likely. They can be left in their natural colour or painted.

Fabric-faced acoustic panels

An absorbing core covered with fabric, used as ceiling panels, hanging rafts or wall panels. They give a soft, finished appearance and a wide choice of colours, and are common in meeting rooms, auditoria, restaurants and open offices where both appearance and high absorption are wanted.

Choosing between them

  • How much absorption is needed? Classrooms and open offices need more than corridors.
  • Will the surface be hit or touched? Choose impact-resistant panels for sports and circulation areas.
  • Is the room humid? Check the humidity resistance of the tile and grid.
  • Is regular access needed? Lay-in tiles are the easiest to lift.
  • Is the full ceiling covered? Rafts and baffles can be added where a continuous ceiling is not possible.

Acoustic targets for a room should be set by the project's acoustic designer; product test reports show what each panel achieves in a given build-up.

Related systems

This article is general guidance. Project requirements, local building regulations and the specification confirmed with your order always take priority.

More articles