Generalimex Trading Limited — Your System Solutions Partner

Facade Systems

Concealed or visible fixing for facade panels

The way a panel is held on the wall changes the appearance, the installation speed and the price per square metre. A short comparison of the common methods.

Two facades made of the same panel can look different and cost different amounts because of one decision: how the panel is fixed. The main families are visible mechanical fixing, concealed mechanical fixing and bonding.

Visible fixing

The panel is held by clips whose small tabs show at the panel edges, or by rivets or screws through the face. For ceramic and porcelain, stainless steel clips are common; for HPL and fiber cement, colour-matched rivets are usual.

  • Lowest cost and fastest installation.
  • Panels need no machining on the back.
  • Individual panels are easy to replace.
  • The fixing points are part of the appearance, so their layout should be drawn, not left to site.

Concealed mechanical fixing

The panel is held from its edges or from its back, so nothing shows on the face. Common methods are grooves in the panel edge that sit on hidden clips, and undercut anchors set into the back of the panel that hang on horizontal rails.

  • Clean surface with only the joints visible.
  • Panels must be grooved or drilled in the factory, which adds cost.
  • The substructure has more parts and needs more accurate setting out.
  • Well suited to large-format panels and prominent elevations.

Bonded fixing

The panel is bonded to the profiles with a structural adhesive system. The face is uninterrupted and the substructure is simple, but the result depends on correct surface preparation, primer, temperature and curing time. Bonding should follow the adhesive manufacturer's instructions exactly and is not accepted for every building type or height in every country.

How to choose

  • Budget first: visible clips or rivets.
  • Appearance first: concealed clips or undercut anchors.
  • Heavy or large panels: mechanical fixing sized for the panel weight.
  • Maintenance access: systems where one panel can be removed without disturbing its neighbours.

On this site the fixing method is part of each system name, and the same panel is offered with several fixing options so the prices can be compared directly.

Related systems

This article is general guidance. Project requirements, local building regulations and the specification confirmed with your order always take priority.

More articles