Generalimex Trading Limited — Your System Solutions Partner

Facade Systems

Ceramic, terracotta, fiber cement or HPL: choosing a cladding material

Four common rainscreen cladding materials compared by weight, appearance, fixing options and the questions to ask before specifying them.

All four materials below are used as the outer skin of a ventilated facade. They differ in weight, in the way they can be fixed and in how they age. There is no single best choice; the right one depends on the building and the budget.

Ceramic and porcelain panels

Dense, fired panels with very low water absorption and stable colour. They are available in large formats and in stone, concrete and plain finishes. They are hard and easy to clean, but relatively heavy and brittle, so the substructure and fixing must be designed for the panel weight. Fixing can be visible clips, concealed clips, undercut anchors or bonding.

Terracotta

Extruded clay panels, usually hollow, hung horizontally on clips. The colour runs through the body of the material and the look is warm and natural. Terracotta is also made as baguettes and louvres for sun shading. Panel lengths are limited by the extrusion and firing process, so the facade has a clear horizontal rhythm.

Fiber cement

Cement-based boards reinforced with fibres, supplied through-coloured or coated. They are lighter than ceramic, can be cut and drilled with suitable site tools, and are normally fixed with rivets or screws; concealed fixing with undercut anchors is possible on thicker boards. Cut edges and fixing distances should follow the board manufacturer's rules.

HPL (high-pressure laminate)

Compact laminate panels with a decorative surface, available in many colours and wood or stone decors. They are light, tough and easy to machine, which suits large panels and complex shapes. HPL is an organic material, so its fire classification must be checked against the requirements for the building's height and use.

Questions that narrow the choice

  • What can the structure carry? Lighter panels allow a lighter substructure and wider bracket spacing.
  • What does the fire regulation require? Mineral materials such as ceramic, terracotta and fiber cement are generally easier to use where non-combustible cladding is required. Always confirm with the test reports of the actual product.
  • How will the facade be fixed? Not every material suits every fixing method.
  • What is the panel module? Standard sizes cost less than cut-to-size panels and waste less.
  • What is the total installed cost? Compare complete systems per square metre, not panel prices alone.
Related systems

This article is general guidance. Project requirements, local building regulations and the specification confirmed with your order always take priority.

More articles